ASAMETRE Model E/N Cam tüplü
Asameters® E and N series are rugged flowmeters, suitable for measuring instantaneous flow of any type of fluid (gas and liquid), at temperature and pressure conditions kept within glass resistance limits, in absence of water hammer.
They are ideal where it is essential to show the flow of medium through the glass measuring tube and the float, the only moving part, ensuring the reliability of measurement over time.
These Asameters® not require power supply ensuring a cost-free measure even in hazardous areas (ATEX classified). Therefore are best used in applications where control of flow should not weigh too heavily on the cost of the system.
Also the low pressure losses are a strong point for this family of Asameters as they allow the installation of non-performing pumps on the plant.
Main flow-ranges
Model E:
AIR min 5 nl/h max 400.000 nl/h @ T= 20° C and P= 1013 mbar a
WATER min 0,07 l/h max 13.000 l/h
On request they can be made no standard flow-rates
Model N:
AIR min 5 nl/h max 1.000 nm3/h @ T= 20° C and P= 1013 mbar a
WATER min 2 l/h max 43.000 l/h
On request they can be made no standard flow-rates
Available standard connections are: threaded Gas-F according to UNI 339 or flanged PN10 UNI EN1092-1.
Other standards on request (ANSI, DIN, TRICLAMP, RJ etc…).
Manufacturing materials are: carbon steel, stainless steel 316L; P.V.D.F.; P.P.
On request Hastelloy C, Monel, Titanium.
Seals are in Buna or Viton or PTFE.