Torque Measuring System TORXmeter®
The
TORXmeter® is a permanent shaft power measuring system basically
designed for seagoing vessels, but may be used also for other
engine-driven applications. Provided data are vital for evaluating
engine performance in relation to power consumption (burning of fuel),
thus helps to improve engine efficiency and to reduce fuel costs.
The TORXmeter® is easy to install and requires no electronic/electric
parts on the shaft. Only two magnetic sensor belts in a distance of 1.5
to 2 m have to be installed on the shaft. The system works contact free,
which makes it rugged and more durable than competitive systems.
Simple installation and calibration makes presence of a service technician unnecessary and is usually done by the vessel’s crew.
Data transmission to additional systems, e.g. vessel’s automation
system, can be easily done via 4 to 20 mA outputs and NMEA Protocol
(RS485). Installation of several repeater displays (engine control room,
bridge) is possible.
The intuitive touch screen interface of the terminal box allows easy
operation, permanent display, and automatic reports of following values:
- Shaft power (kW)
- Shaft speed (RPM)
- Torque (kNm)
Spesifikasyonlar
Power supply: | 100/240 VAC, 50/60Hz, 16 A |
Temperature range: | Terminal box and MWE box 0 to 60°C |
EXFR sensors and belts -40 to 85°C | |
Shaft diameter: | 250 to 1,000 mm; < 250 mm on request |
Sensor measuring accuracy: | < 0.1 % FS |
Speed range: | up to 250 rpm; > 250 rpm on request |
Torque/RPM measurement: | high-resolution sensor, contact-free |
Analogue outputs: | 3 x 4 to 20 mA signals for torque, shaft power & speed |
Alarm outputs: | Engine overload, system error (potential free contacts) |
Interface: | RS485 (NMEA 183) |
Protection class: | Terminal box and MWE box IP54 |
EXFR sensors and belts IP67 | |
Firmware update: |
via USB stick (update file can be sent via e-mail) |
Display: | Illuminated touch screen |
Optional equipment: | Repeater display for ECR or bridge installation |